Events Archive - CELLINK South Korea https://www.cellink.com/kr/event/ Thu, 05 Jan 2023 16:31:15 +0000 ko-KR hourly 1 Marine sponges in 3D cell culture for biologics and cell line development https://www.cellink.com/kr/event/marine-sponges-in-3d-cell-culture-for-biologics-and-cell-line-development/ Tue, 20 Sep 2022 12:03:04 +0000 https://www.cellink.com/?post_type=event&p=36728 Marine sponges in 3D cell culture for biologics and cell line development October 18 | 4 p.m. CET | 10 a.m. EST| Speaker: Shirley Pomponi, Research Professor at Harbor Branch Oceanographic Institute-Florida Atlantic University SPEAKER Dr. Shirley Pomponi Research Professor at Harbor Branch Oceanographic Institute Florida Atlantic University 18 OCT 2022 4 p.m. CET 10 […]

The post Marine sponges in 3D cell culture for biologics and cell line development appeared first on CELLINK South Korea.

]]>

Marine sponges in 3D cell culture for biologics and cell line development

October 18 | 4 p.m. CET | 10 a.m. EST| Speaker: Shirley Pomponi, Research Professor at Harbor Branch Oceanographic Institute-Florida Atlantic University

SPEAKER

Dr. Shirley Pomponi

Research Professor at Harbor Branch Oceanographic Institute

Florida Atlantic University

18 OCT
2022
4 p.m. CET
10 a.m. EST

About the webinar

Join us for an exciting webinar as we take a deep dive to explore how bioprinting is expanding the impact of marine invertebrate cell line development and drug discovery and habitat restoration applications. Dr. Shirley Pomponi will detail her group’s work as they look to combine the power of 3D bioprinting and cell culture of marine sponges to expand the production of critical sponge derived bio-active compounds and develop a sponge nursery for habitat restoration.

Learn more about:

  • How bioprinting is supporting marine biology research
  • Experimental considerations for sponge 3D cell culture
  • The impact of scaling up bio-active compound production
Register now

The post Marine sponges in 3D cell culture for biologics and cell line development appeared first on CELLINK South Korea.

]]>
3D bioprinting for colorectal cancer modeling, drug testing and personalized medicine https://www.cellink.com/kr/event/3d-bioprinting-for-colorectal-cancer-modeling-drug-testing-and-personalized-medicine/ Mon, 12 Sep 2022 09:28:30 +0000 https://www.cellink.com/?post_type=event&p=34783 3D bioprinting for colorectal cancer modeling, drug testing and personalized medicine September 28 | 3 p.m. CET | 9 a.m. EST| Speaker: Dr. Yordan Sbirkov SPEAKER Dr. Yordan Sbirkov Chief Assistant Professor Medical University of Plovdiv, Bulgaria 28 SEP 2022 3 p.m. CET 9 a.m. EST About the webinar As few as 0.1% of all […]

The post 3D bioprinting for colorectal cancer modeling, drug testing and personalized medicine appeared first on CELLINK South Korea.

]]>

3D bioprinting for colorectal cancer modeling, drug testing and personalized medicine

September 28 | 3 p.m. CET | 9 a.m. EST| Speaker: Dr. Yordan Sbirkov

SPEAKER

Dr. Yordan Sbirkov

Chief Assistant Professor

Medical University of Plovdiv, Bulgaria

28 SEP
2022
3 p.m. CET
9 a.m. EST

About the webinar

As few as 0.1% of all drugs make it from bench to bedside, significantly impacted by the poor predictive models available during pre-clinical and clinical phases of drug testing. Dr. Sbirkov and his colleagues are looking to improve success rates and bring novel treatments for colorectal cancer by developing superior disease models that capture in vivo conditions closer, possess higher predictive properties, and offer opportunities for individualized therapies.

 

In this webinar Dr. Sbirkov will discuss:

  • 3D bioprinting for disease modeling and drug testing, unlocking potential for personalized therapeutic screening.
  • Development of an affordable, flexible, and highly reproducible 3D bioprinted CRC model
  • Gene expression analysis comparing 3D bioprinted constructs with 2D monolayer cancer cells
  • Comparison of drug responses between 2D and 3D bioprinted cells
  • Validation of 3D bioprinted method with patient samples
  • Further insights on oncology models from ongoing work
Register now

The post 3D bioprinting for colorectal cancer modeling, drug testing and personalized medicine appeared first on CELLINK South Korea.

]]>
Royce Training: 3D Bioprinting for Healthcare Applications https://www.cellink.com/kr/event/royce-training-3d-bioprinting-for-healthcare-applications/ Wed, 07 Sep 2022 14:13:18 +0000 https://www.cellink.com/?post_type=event&p=34719 Training Course: 3D Bioprinting for Healthcare Applications Hosted in partnership with the Henry Royce Insitute | 17th – 18th October About the course Location Royce Hub Building Manchester, United Kingdom. Time All day Price £ 25 Dates 17 – 18 Oct 2022 Registration Here → This course will explore the use of 3D bioprinting techniques […]

The post Royce Training: 3D Bioprinting for Healthcare Applications appeared first on CELLINK South Korea.

]]>

Training Course: 3D Bioprinting for Healthcare Applications

Hosted in partnership with the Henry Royce Insitute | 17th - 18th October

About the course

Location

Royce Hub Building

Manchester, United Kingdom.

Time

All day

Price

£ 25

Dates

17 - 18 Oct 2022

Registration

This course will explore the use of 3D bioprinting techniques in the development and manufacture of bioengineered systems/devices for application in Tissue Engineering, Regenerative Medicine, Drug Development and other more traditional areas of healthcare. The programme will cover both the use of extrusion- and light-based printing approaches.

Hear from experts already using bioprinting

Participants will hear from experts already using bioprinting to tackle challenges in different healthcare settings. The presentations will offer a chance to learn about the current uses of the technology, where innovation is driving the field, and what future applications can be expected.

Learn how to fabricate complex in vitro models

Attendees will learn how to use different 3D bioprinting technologies and techniques to develop in-vivo like microenvironment and fabricate complex, 3D in vitro models.

Hands-on training in small groups

There is the option for participants to join hands-on training sessions in small groups, each afternoon of the course. Each group will rotate through a series of bioprinting practical demonstrations and discussion sessions around experimental design and best practice. The number of participants is limited to 40 people to maximize hands-on experience.

At the end of course completion, you will receive a certificate.

The hands-on training will cover:

Extrusion bioprinting with BIO X

  • Optimization of printing parameters for extrusion based bioprinting.
  • Multimaterial bioprinting and how to tackle different bioink behaviors.​
  • FRESH bioprinting and other strategies within bioprinting.​

Extrusion bioprinting with BIO X6

  • Modelling of complex biological models, new tools for 3D bioprinting model design.​
  • Creating vascularization within the 3D bioprinted model using co-axial bioprinting

DLP bioprinting

  • 3D model creation and considerations for light-based bioprinting.​
  • Bioprinting of high-resolution scaffolds in multiwell plate.​
  • Organ-on-a chip strategies and perfusable models utilizing DLP technology.​

Two-Photon Grayscale Lithography technology

  • Deep-dive into two-photon polymerization technology and its possibilities.​
  • Introduction to miniaturized scaffolds for cell guidance and suitable biomaterials.​
  • 2PP demo and live printing.​

Audience

The course is aimed at PhD students, clinicians, and research or application scientists seeking to use bioprinting technologies to develop novel healthcare solutions. Participants should have prior knowledge and experience in fields covering medicine, biotechnology, or materials science.

Registration

Register below. The spots are limited.

Learning outcomes

After this course you should be able to:

  • Understand the working principle, differences, advantages and limitations of light and extrusion-based bioprinters in a healthcare context.
  • Select the most suitable bioprinter (i.e. light or extrusion-based) for your project based on processable materials, resolution, cell compatibility among other requirements.
  • Design and print 3D constructs employing both light and extrusion-based systems and a range of different polymeric hydrogels.

Programme

DAY 1

Time
Session
Speaker

8:30-9:00 

Arrival, registration and refreshments

9:00-9:20 

Welcome to Royce and Royce’s Bioprinting Technology Platform

Tom Hancocks & Marco Domingos
Henry Royce Institute

9:20-9:30 

Introduction to CELLINK

Andrew Ridley PhD, Director Sales & Team Lead Europe, CELLINK

9:30-10:00 

Introduction to the technologies and strategies used within extrusion based bioprinting that later will be applied in the hands-on training. Discover how 3D bioprinting can be used for the creation of in-vivo recapitulating biomimetic models for applications such as drug discovery, immunology, personalized medicine and organ-on-a-chip models.

We will discuss current applications leveraging the precision, flexibility and multifunctionality of the latest 3D bioprinting technologies and how combination of technologies, cell types and bioinks allows access to in-vivo like cellular response in vitro.

Isabella Bondesson
Field Applications Specialist & Team Lead, CELLINK

10:00-10:30 

Dr. Jason Wong, Academic Consultant & Senior Clinical Lecturer in Plastic & Reconstructive Surgery

10:30-11:00 

Break

11:00-11:30 

New materials and manufacturing techniques are emerging with the potential to address the challenges associated with the manufacture of pharmaceutical systems that will teach new tricks to old drugs and on the development of new personalised medical devices. Current medical developments are aiming to achieve personalised medicine adapted to patient’s needs. In this context, 3D printing, Bioprinting and 4D printing techniques, allow for a patient-centered approach. Scaffolds, drug-loaded implants, microneedles, and prosthetics have been successfully manufactured; however, some challenges must be overcome to shift to clinical practice. Therefore, the talk will provide an overview of the different systems prepared in our state-of-the-art Additive Manufacturing facility for drug delivery and tissue engineering applications, and discussed the challenges and future of Additive Manufacturing in personalised medicine.  

Prof. Dimitrios Lamprou, Chair of Biofabrication and Advanced Manufacturing, School of Pharmacy – Queen’s University Belfast 

11:30-12:00 

The talk will describe Professor Roy’s research on the synthesis of natural polymers of bacterial origin including Polyhydroxyalkanoates (PHAs) and Bacterial cellulose.  She will describe how these polymers can be used in a range of biomedical applications including tissue engineering, drug delivery and medical device development. In her talk she will outline the synthesis process, the benefits of such polymers and how they can be processed using fused deposition modelling (FDM), bioprinting and other processing techniques to develop more physiologically relevant tissue models, tissue engineering scaffolds and medical implants.

Prof. Ipsita Roy, Univeristy of Sheffield

12:00-12:15 

Q&A session with the speakers

12:15-13:15 

Lunch and Networking

13:15-15:15 

Hands-on group training

Hosted by the Field Application Specialists, CELLINK & Nanoscribe

15:15-15:45 

Break

15:45-17:45 

Hands-on group training

Hosted by the Field Application Specialists, CELLINK & Nanoscribe

17:45-19:00 

Poster presentations and Networking drinks

DAY 2

Time
Session
Speaker

8:30-8:55 

Arrival, registration and refreshments

8:55-9:00 

Overview of the day

Marco Domingos
 Henry Royce Institute

9:00-9:30 

This presentation will focus on the synthesis of bio-based polymers suitable for additive manufacturing. Several examples of different applications in tissue engineering will be presented. The limitations and possibilities of various polymer synthesis strategies will be discussed.

Prof. Jorge Coelho
The University of Coimbra

9:30-10:00 

Remmi Baker, PhD, Business Development, Nanoscribe

Pierre-Alexandre Laurent, PhD, Senior Application Scientist, CELLINK

10:00-10:30 

The Quantum X bio is the first 3D bioprinter of its kind; enabling sub-micron printing resolution, and raising the bar for high-precision 3D bioprinting. Powered by NANOSCRIBE’s proprietary Two-Photon Grayscale Lithography (2GL®) technology and CELLINK’s award-winning cell-friendly solutions, the Quantum X bio has been customized and reimagined for cell biologists and biomedical engineers. High-throughput batch production and precision printing meet patented Clean Chamber sterilization technologies, advanced temperature controls, metadata collection, and biocompatibility to empower scientists and engineers with the fastest and most shape-accurate 3D printer on the market. In this live product demo, we will discuss how the Quantum X bio will accelerate innovation and production in critical application areas for biomedical technologies, tissue engineering, cell biology, and regenerative medicine.

Remmi Baker, PhD, Business Development, Nanoscribe

10:30-10:45 

Break

10:45-11:15 

Just 12% of drugs that enter clinical development are ultimately successfully approved for market use. Candidates often fail due to lack of efficacy when finally tested in humans in late-stage trials, due to limitations of current in vitro and in vivo models used in research. Most target and drug discovery programmes rely on in vitro testing of mammalian cells grown on artificial substrates in single-layer sheets or artificial 3D substrates, which does not accurately represent the composition of human tissues. To improve the success rate of drug discovery, Engitix first-in-class proprietary platform, it is underpinned by our human physiologically realistic in vitro 3-D models that are serving as tools in transforming our ability to identify new targets and more accurately predict the efficacy of therapeutic candidates. The Engitix assay combines the human extracellular matrix-based discovery platform with nanocellulose as supporting material and by exploiting the BIO X technology it allows us to drive the identification and validation of targets for fibrosis and cancer.

Lisa Sassi, Scientist, Engitix Therapeutics

11:15-11:45 

At CTI BIOTECH we can now 3D-Bioprint human tumours and keep them alive for more than 8 months. This innovation allows a strong movement towards not only personalized medicine, but also the possibility to side-by-side follow the chemotherapy of an individual patient to investigate why resistance to a particular treatment starts. Further to that our 3D-bioprinted human tumours are advancing preclinical research faster than ever before since we can take a tiny part of the patient’s biopsy and 3D-bioprint hundreds of models to create model tumours to that found in the patient and use the models to investigate not only new drugs, but also cellular treatments like CAR-T and NK cell strategies. For the first time, these innovations allow better prediction of therapy outcome and faster movement to new strategies, using a convergence of advanced technologies to mimic in the lab what is happening in patients. In addition, we have created the world’s widest range of 3D bioprinted skin models for drug and molecule screening, including: basic skin, vascularized skin, pigmented skin, immunized skin. 

Clement Milet, Laboratory Director

CTI Biotech 

11:45-12:00 

Q&A session with the speakers

12:00-13:00 

Lunch and Networking

13:00-15:00 

Hands-on group training

Hosted by the Field Application Specialists, CELLINK & Nanoscribe

15:00-15:30 

Break

15:30-17:30 

Hands-on group training

Hosted by the Field Application Specialists, CELLINK & Nanoscribe

17:30-17:45 

Closing remarks

Tom Hancocks & Marco Domingos, Henry Royce Institute

Brought to you by
Click the button below to register your attendance.

The post Royce Training: 3D Bioprinting for Healthcare Applications appeared first on CELLINK South Korea.

]]>
Royce Agenda 28.09 Royce Agenda 2 – 28.09. HenryRoyceInstitute_MasterLogo_RGB_White nanoscribe_logo_Neg (1)
3D Bioprinting – A platform towards bioelectronics tissues https://www.cellink.com/kr/event/a-platform-towards-bioelectronics-tissues/ Wed, 03 Aug 2022 06:24:47 +0000 https://www.cellink.com/?post_type=event&p=33976 18 Aug | 9 a.m. CEST, 3 p.m. SGT | Speaker: Wai Yee Yeong / Associate Professor at School of Mechanical and Aerospace Engineering (MAE) , Nanyang Technological University SPEAKER Wai Yee Yeong Ph.D. Candidate Associate Professor at School of Mechanical and Aerospace Engineering (MAE), Nanyang Technological University  18 AUG 2022 3:00 pm SGT 9:00 […]

The post 3D Bioprinting – A platform towards bioelectronics tissues appeared first on CELLINK South Korea.

]]>

3D Bioprinting – A platform towards bioelectronics tissues

18 Aug | 9 a.m. CEST, 3 p.m. SGT | Speaker: Wai Yee Yeong / Associate Professor at School of Mechanical and Aerospace Engineering (MAE) , Nanyang Technological University

SPEAKER

Wai Yee Yeong
Ph.D. Candidate

Associate Professor at School of Mechanical and Aerospace Engineering (MAE), Nanyang Technological University 

18 AUG
2022
3:00 pm SGT
9:00 am CEST

About the webinar

Join us for a webinar with Prof Yeong Wai Yee to learn about a 3D bioprinting platform towards bioelectronics tissues. Bioprinting technologies provide the freedom to assemble different type of materials, living and functional nanomaterials, on-demand within a single multi-materials system.

Learn more as Prof Yeong explains:

Watch on demand

Customer Spotlights

The post 3D Bioprinting – A platform towards bioelectronics tissues appeared first on CELLINK South Korea.

]]>
SuperShirley carrying a Sponge _MG_1181 small BIONOVA-X-Bioprinting
High-speed and high-resolution light based bioprinting — introducing the BIONOVA X​ https://www.cellink.com/kr/event/high-speed-and-high-resolution-light-based-bioprinting-introducing-the-bionova-x-apac/ Wed, 01 Jun 2022 08:38:49 +0000 https://www.cellink.com/?post_type=event&p=31408 A journey into the (almost) unlimited potential of microgels High-speed and high-resolution light based bioprinting — introducing the BIONOVA X June 20 | 11 am

The post High-speed and high-resolution light based bioprinting — introducing the BIONOVA X​ appeared first on CELLINK South Korea.

]]>

A journey into the (almost) unlimited potential of microgels

High-speed and high-resolution light based bioprinting — introducing the BIONOVA X

June 20 | 11 am SGT | 1pm AEST| Speaker: Wei Zhu, Ph.D. | CEO Allegro 3D

SPEAKER

Wei Zhu
CEO

Allegro 3D

20 JUN
2022
11 am SGT
1pm AEST

About the webinar

Join us for an in-depth conversation on our latest 3D bioprinter, the BIONOVA X.

Learn how this patented continuous printing process enables a 10 micron resolution, multi-stiffness constructs and high throughput capabilities across tissue engineering, regenerative medicine and disease modelling applications.

Watch on demand

The post High-speed and high-resolution light based bioprinting — introducing the BIONOVA X​ appeared first on CELLINK South Korea.

]]>
SuperShirley carrying a Sponge _MG_1181 small BIONOVA-X-Bioprinting
3D bioprinting technologies for more physiologically-relevant microenvironment https://www.cellink.com/kr/event/3d-bioprinting-technologies-for-more-physiologically-relevant-microenvironment/ Tue, 17 May 2022 09:25:30 +0000 https://www.cellink.com/?post_type=event&p=31131 June 15 | 7 a.m. CEST, 10:30 a.m. IST | Speaker: Dr. Haruka Yoshie, Field Application Specialist SPEAKER Dr. Haruka Yoshie Field Application SpecialistCELLINK 15 JUN 2022

The post 3D bioprinting technologies for more physiologically-relevant microenvironment appeared first on CELLINK South Korea.

]]>

3D bioprinting technologies for more physiologically-relevant microenvironment

June 15 | 7 a.m. CEST, 10:30 a.m. IST | Speaker: Dr. Haruka Yoshie, Field Application Specialist

SPEAKER

Dr. Haruka Yoshie

Field Application Specialist
CELLINK

15 JUN
2022
7 a.m. CEST
10:30 a.m. IST

About the webinar

Watch on demand

The post 3D bioprinting technologies for more physiologically-relevant microenvironment appeared first on CELLINK South Korea.

]]>
SuperShirley carrying a Sponge _MG_1181 small BIONOVA-X-Bioprinting
CELLINK Bioink – setting a standard in the bioprinting field https://www.cellink.com/kr/event/cellink-bioink-setting-a-standard-in-the-bioprinting-field/ Mon, 16 May 2022 11:26:19 +0000 https://www.cellink.com/?post_type=event&p=31104 May 25 | 3:30 p.m. CEST, 9:30 a.m. EDT SPEAKER Lauri Paasonen & Elin Pernevik UPM Senior Scientist & Biomaterial Scientist, CELLINK 25 MAY 2022

The post CELLINK Bioink – setting a standard in the bioprinting field appeared first on CELLINK South Korea.

]]>

CELLINK Bioink – setting a standard in the bioprinting field

May 25 | 3:30 p.m. CEST, 9:30 a.m. EDT

SPEAKER

Lauri Paasonen & Elin Pernevik

UPM Senior Scientist & Biomaterial Scientist, CELLINK

25 MAY
2022
3:30 p.m. CEST
9:30 a.m. EDT

About the webinar

Curious to learn more about the first universal bioink that continues to shape the bioprinting field?

Join bioink experts from CELLINK and UPM for a deep dive into CELLINK Bioink and how it has set the standards for bioink properties.

Learn about plant based bioinks, harnessing shear thinning properties from nanofibrillar cellulose and leveraging the versatility of alginate for an unparalleled temperature-independent, consistent and high fidelity printing experience.

Watch on demand

The post CELLINK Bioink – setting a standard in the bioprinting field appeared first on CELLINK South Korea.

]]>
SuperShirley carrying a Sponge _MG_1181 small BIONOVA-X-Bioprinting
Formulation strategies of 3D printable hydrogel inks for rapid response to external stimuli https://www.cellink.com/kr/event/formulation-strategies-of-3d-printable-hydrogel-inks-for-rapid-response-to-external-stimuli/ Sun, 15 May 2022 09:58:56 +0000 https://www.cellink.com/?post_type=event&p=31063 May 26 | 9 a.m. CEST, 4 p.m. KST | Speaker: Kwanwoo Shin, Professor / Chemistry Department Director / Institute of Biological Interfaces, Sogang University SPEAKER Kwanwoo

The post Formulation strategies of 3D printable hydrogel inks for rapid response to external stimuli appeared first on CELLINK South Korea.

]]>

Formulation strategies of 3D printable hydrogel inks for rapid response to external stimuli

May 26 | 9 a.m. CEST, 4 p.m. KST | Speaker: Kwanwoo Shin, Professor / Chemistry Department Director / Institute of Biological Interfaces, Sogang University

SPEAKER

Kwanwoo Shin

Professor / Chemistry Department Director / Institute of Biological Interfaces, Sogang University

26 MAY
2022
9 a.m. CEST
4 p.m. KST

About the webinar

4D printing is gaining great attention as a next-generation manufacturing technology that aims to produce dynamic 3D structures capable of changing shape or behavior autonomously in a manner resembling natural movement.

The primary research focus of the rapidly evolving 4D printing technology is the development of novel hydrogel materials that enable shape control or motion-related features in conjunction with high resolution 3D printing. In this webinar, a couple of strategies in 3D hydrogel ink formulation will be introduced to improve the response of 3D architecture without sacrificing printing resolution.

Watch on demand

The post Formulation strategies of 3D printable hydrogel inks for rapid response to external stimuli appeared first on CELLINK South Korea.

]]>
SuperShirley carrying a Sponge _MG_1181 small BIONOVA-X-Bioprinting
Hablemos de bioimpresión 3D: principios, realidades y perspectivas en México https://www.cellink.com/kr/event/hablemos-de-bioimpresion-3d-principios-realidades-y-perspectivas-en-mexico/ Thu, 05 May 2022 12:27:14 +0000 https://www.cellink.com/?post_type=event&p=30747 Hablemos de bioimpresión 3D: principios, realidades y perspectivas en México May 19 | 6.00 p.m. CST, 7.00 p.m. EST | Host: Dr. Alfie Raymundo, Co-host:

The post Hablemos de bioimpresión 3D: principios, realidades y perspectivas en México appeared first on CELLINK South Korea.

]]>

Hablemos de bioimpresión 3D: principios, realidades y perspectivas en México

May 19 | 6.00 p.m. CST, 7.00 p.m. EST | Host: Dr. Alfie Raymundo, Co-host: Alejandro Salinas | Speakers: Dr. Mario Álvarez & Dr. Grissel Trujillo

SPEAKERS

Dr. Mario Álvarez
Dr. Grissel Trujillo
Instituto Tecnológico y de Estudios Superiores de Monterrey:
19 May
2022
6 p.m. CST
7 p.m. EST

About the webinar

En este foro abierto al diálogo y a preguntas, tendrás la oportunidad de interactuar de manera virtual con la Dra. Grissel Trujillo y el Dr. Mario Álvarez, ambos Investigadores insignia en el ramo de la bioimpresión 3D dentro del Instituto Tecnológico y de Estudios Superiores de Monterrey, México, con el fin de conocer cuáles son los principios de la bioimpresión 3D, así como las realidades y perspectivas de ésta tecnología en México. Te invitamos a participar en esta interesante discusión.

Register now

The post Hablemos de bioimpresión 3D: principios, realidades y perspectivas en México appeared first on CELLINK South Korea.

]]>
SuperShirley carrying a Sponge _MG_1181 small BIONOVA-X-Bioprinting
Bioprinting for structured cultured meat reconstruction https://www.cellink.com/kr/event/bioprinting-for-structured-cultured-meat-reconstruction/ Mon, 02 May 2022 07:51:50 +0000 https://www.cellink.com/?post_type=event&p=30612 May 24 | 8 a.m. CEST, 3 p.m. JST Speaker: Fiona Louis, Specially Appointed Assistant Professor, Osaka University SPEAKER Fiona Louis Specially Appointed Assistant Professor,

The post Bioprinting for structured cultured meat reconstruction appeared first on CELLINK South Korea.

]]>

Bioprinting for structured cultured meat reconstruction

May 24 | 8 a.m. CEST, 3 p.m. JST

Speaker: Fiona Louis, Specially Appointed Assistant Professor, Osaka University

SPEAKER

Fiona Louis

Specially Appointed Assistant Professor, Osaka University

24 MAY
2022
8 a.m. CEST
3 p.m. JST

About the webinar

Join us for a webinar with Fiona Louis to learn about the bioprinting for cultured meat reconstruction.

Cultured meat is a hot topic that still is in an early stage and reproducing highly structured steak shapes is considerably challenging. A steak is indeed made of muscle tissues surrounded by fat tissues, as well as blood capillaries held together in an intricate geometry. Bioprinting appears as the ideal solution to solve this problem, improve the final structure of the meat and enable automation of the process.

Learn more as Fiona explains:

Watch on demand

The post Bioprinting for structured cultured meat reconstruction appeared first on CELLINK South Korea.

]]>
SuperShirley carrying a Sponge _MG_1181 small BIONOVA-X-Bioprinting